DIAMOND SPARKLE FEBRUARY 8TH, 2020
DIAMOND SPARKLE ~ SUPPLY LIST AND
PRE-CUTTING INSTRUCTIONS
► Fabric:
Fabric for Corner Beams and Border: 2/3 yard
Background Fabric: 1 yard
Backing: 1 yard
Binding: ¼ yard
You will need to pre-cut:
Fabric for the Beam (Center of the block):
- Cut 2 strips 7" x WOF (Width of Fabric)
- Sub-cut into 8 squares 7" x 7"
- Trim down the remainder of the 7" strip to 4"
- Sub-cut into 4 squares 4" x 4"
- Cut 2 strips 1 1/2" x 17" (border)
- Cut 2 strips 1 1/2" x 16" (border)
- Cut 2 strips 1 1/2" x 10" (border)
Background fabric:
- Cut 1 strip 11" x WOF
- Sub-cut 2 squares 11" x 11"
- Sub-cut 2 strips 1" x 11"
- Cut 1 strip 7" x WOF
- Cut 1 strip 4" x WOF
- Cut 3 strips 2" x WOF (binding)
Bring whatever extra fabric you have, just in case of mis-cuts.
► Pattern: The Diamond Sparkle pattern is INCLUDED in the price of the workshop. If you would like to see a photo of the project before choosing fabrics, please go to www.KathieBeltz.com to see the Diamond Sparkle sample.
► The Corner Beam Tool is required for this pattern. The tool is available from the instructor during class, or at your local quilt shop.
► Coordinating or neutral piecing thread
► Rotary cutter with fresh blade
► Cutting mat
► 6 ½” x 12 ½” ruler
► 12 ½” square ruler
► Masking tape or blue painter’s tape
► Sewing machine, clean and oiled, with new needle, ¼” foot
► Basic sewing supplies: fabric scissors, pins, seam ripper, etc.
► Pencil and pad for notes
Optional
► Small iron and pressing surface
If you have any questions, please do not hesitate to contact me at Kathie@KathieBeltz.com.